Fastest Bandluxe R300 Router Port Forwarding Steps
Bandluxe R300 routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.
The basic process to open a port is:
- Setup a static IP address on either your computer or device that you want to forward a port to.
- Login to your Bandluxe R300 router.
- Navigate to the port forwarding section.
- Click the Security link.
- Click the Port Range Forward or the Single Port Forward button to forward ports.
- Create a port forward entry.
While these steps might seem difficult at first, we will walk you through each step for your Bandluxe R300 router.
We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.
When you use Network Utilities you get your port forwarded right now!
It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.
- Recommended - Our free program will setup a static IP address for you.
- → Download Network Utilities today!
- Or follow our Static IP Address guides to setup a static IP address.
After setting up a static ip address on your devices you need to login to your router.
Now we are going to login to your Bandluxe R300 router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.
Open up your web browser and find the address bar. It should look something like this:
In the picture above the address bar has 192.168.1.1 in it. Just replace all of that with the IP address of your Bandluxe R300 router. Your router's IP address can also be refered to as your computer's default gateway.
By default the IP address is set to: 192.168.1.1
After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:
You should see a box prompting you for your username and password.
- The Default Bandluxe R300 Router Username is: admin
- The Default Bandluxe R300 Router Password is: hsparouter
Enter your username and password, and then click the Login button to log in to your Bandluxe R300 router.
Bandluxe Usernames and Passwords
If your username and password do not work then please visit our Default Bandluxe Router Passwords page.
If you still can't login to your router because you forgot your Bandluxe R300 router username and password, use our How to Reset a Router Password guide to set your Bandluxe R300 router back to its factory settings.
Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:
Click the Security link near the top of the page.
This router has two different sections that allow you to forward ports. One section allows you to forward a range of ports, and the other allows you to forward a single port. To forward a range of ports, click Port Range Forward. To forward a single port, click Single Port Forward.
Here are the ports to forward for Xbox Live:
TCP Ports: 3074 UDP Ports: 3074
If you are looking for the ports for a different application you can find it by either:
Forwarding a Port Range
Create a name for this forward and put it in the Application Name box. The name is only used as a reminder and has no effect on the port forward.
If you are just forwarding a single port number then you can simply enter that same number into both the Start Port and the End Port boxes. If you are forwarding a range of ports, usually separated by a hyphen, then you need to enter the lowest number of that range into the Start Port box and then enter highest number into the End Port box.
In the Protocol box select the protocol that you want to forward these ports over.
Enter the IP address that you are forwarding ports to in the To IP Address box. This is either the IP address of a computer or the IP address of another device on your network.
Enable the Enabled checkbox by putting a check in it.
Forwarding a Single Port
Enter the name of the program into the Application Name box. It doesn't really matter what you put into this box, but something that will remind you why these ports are being forwarded is be a good idea.
Enter the port to forward into the External Port and the Internal Port boxes.
Use the Protocol dropdown box to select the protocol type of the ports you are forwarding.
Enter the IP address of the device that you want to forward ports to into the To IP Address box. This can be either the IP address of your computer or the IP address of another device on your network.
Make sure that the Enabled checkbox is checked.
When you're finished, click Save Settings near the bottom of the screen to save your changes.
Test if Your Ports are Open
Now that you have forwarded ports on the Bandluxe R300 you should test to see if your ports are forwarded correctly.
To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.
Bandluxe R300 Router Screenshots
We also have the Internets largest collection of Router Screenshots.