Network Utilities

Belkin F6D3230-4 Router Port Forwarding

Belkin F6D3230-4 routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.

The basic process to open a port is:

  1. Setup a static IP address on either your computer or device that you want to forward a port to.
  2. Login to your Belkin F6D3230-4 router.
  3. Navigate to the port forwarding section.
    • Click the Virtual Servers link.
  4. Create a port forward entry.

While these steps might seem difficult at first, we will walk you through each step for your Belkin F6D3230-4 router.



We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.

Get Started Now!

When you use Network Utilities you get your port forwarded right now!

Step 1

It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.

  • Recommended - Our free program will setup a static IP address for you.
  • Or follow our Static IP Address guides to setup a static IP address.

After setting up a static ip address on your devices you need to login to your router.

Step 2

Now we are going to login to your Belkin F6D3230-4 router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.

Open up your web browser and find the address bar. It should look something like this:


192.168.2.1

In the picture above the address bar has 192.168.2.1 in it. Just replace all of that with the IP address of your Belkin F6D3230-4 router. Your router's IP address can also be refered to as your computer's default gateway.

By default the IP address is set to: 192.168.2.1

After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:

Belkin F6D3230-4

You should see a box prompting you for your username and password.

  • The Default Belkin F6D3230-4 Router Username is:
  • The Default Belkin F6D3230-4 Router Password is: blank

Enter your username and password, and then click the Login button to log in to your Belkin F6D3230-4 router.

Belkin Usernames and Passwords

If your username and password do not work then please visit our Default Belkin Router Passwords page.

If you still can't login to your router because you forgot your Belkin F6D3230-4 router username and password, use our How to Reset a Router Password guide to set your Belkin F6D3230-4 router back to its factory settings.

Step 3

Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:

Belkin F6D3230-4

Click the Virtual Servers link near the left of the page.

Belkin F6D3230-4 port forward

Step 4

Here are the ports to forward for Xbox Live:

TCP Ports:3074
UDP Ports:3074

If you are looking for the ports for a different application you can find it by either:

In the Enable checkbox put a checkmark.

Make up a name to put in the Description box. The name does not have any effect on the functionality of the forward, it's simply there so you can know why it was created.

If you are only forwarding a single port number then enter that number into both the Left Private Port and the Right Private Port boxes. If you are forwarding a range of ports separated by a hyphen then enter the lowest number of that range into the Left Private Port box and the highest number of that range into the Right Private Port box.

Select the required protocol for these ports from the Type dropdown box.

Enter the IP address to forward these ports to into the Private IP Address box. If you are forwarding ports so you can run a program on a device other than your computer then you can enter your device's IP address into that box.

When you're finished, click Apply Changes near the bottom of the screen to save your changes.

Test if Your Ports are Open

Now that you have forwarded ports on the Belkin F6D3230-4 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Belkin F6D3230-4 Router Screenshots

We also have the Internets largest collection of Router Screenshots.