Network Utilities

Simple Belkin F9K1002 Router Port Forwarding Steps

This is the open port guide for the Belkin F9K1002 v4. We also have the following related guides:

Pick the guide that most closely matches your router.

Belkin F9K1002 v4 routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.

The basic process to open a port is:

  1. Setup a static IP address on either your computer or device that you want to forward a port to.
  2. Login to your Belkin F9K1002 router.
  3. Navigate to the port forwarding section.
    • Click the Virtual Servers link.
  4. Create a port forward entry.

While these steps might seem difficult at first, we will walk you through each step for your Belkin F9K1002 v4 router.



We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.

Get Started Now!

When you use Network Utilities you get your port forwarded right now!

Step 1

It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.

  • Recommended - Our free program will setup a static IP address for you.
  • Or follow our Static IP Address guides to setup a static IP address.

After setting up a static ip address on your devices you need to login to your router.

Step 2

Now we are going to login to your Belkin F9K1002 v4 router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.

Open up your web browser and find the address bar. It should look something like this:


192.168.2.1

In the picture above the address bar has 192.168.2.1 in it. Just replace all of that with the IP address of your Belkin F9K1002 v4 router. Your router's IP address can also be refered to as your computer's default gateway.

By default the IP address is set to: 192.168.2.1

After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:

Belkin F9K1002v4

Click the Virtual Servers link near the left of the page.

Belkin F9K1002v4

You should see a box prompting you for your username and password.

  • The Default Belkin F9K1002 Router Username is:
  • The Default Belkin F9K1002 Router Password is: blank

Enter your username and password, and then click the Login button to log in to your Belkin F9K1002 v4 router.

Belkin Usernames and Passwords

If your username and password do not work then please visit our Default Belkin Router Passwords page.

If you still can't login to your router because you forgot your Belkin F9K1002 v4 router username and password, use our How to Reset a Router Password guide to set your Belkin F9K1002 v4 router back to its factory settings.

Step 3

Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:

Belkin F9K1002v4 port forward

Step 4

Here are the ports to forward for Xbox Live:

TCP Ports:3074
UDP Ports:3074

If you are looking for the ports for a different application you can find it by either:

In the Enable checkbox put a checkmark.

Put a name for this forward in the Description box so that you can remember why you set this forward up. The name does not matter so pick something that has meaning to you.

Enter the port to forward into both the Inbound Port and the Private Port boxes.

In the Type box select the protocol that you want to forward these ports over.

You need to enter the IP address that you are forwarding ports to in the Private IP Address box. It's possible for this to be either the IP address of your computer or any other IP address on your network that you want ports forwarded to.

When you're finished, click Apply Changes near the top of the screen to save your changes.

Test if Your Ports are Open

Now that you have forwarded ports on the Belkin F9K1002 v4 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Belkin F9K1002 v4 Router Screenshots

We also have the Internets largest collection of Router Screenshots.