Dlink DSL-504 v2 routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.
The basic process to open a port is:
While these steps might seem difficult at first, we will walk you through each step for your Dlink DSL-504 v2 router.
We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.
When you use Network Utilities you get your port forwarded right now!
It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.
Now we are going to login to your Dlink DSL-504 v2 router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.
Open up your web browser and find the address bar. It should look something like this:
In the picture above the address bar has 192.168.0.1 in it. Just replace all of that with the IP address of your Dlink DSL-504 v2 router. Your router's IP address can also be refered to as your computer's default gateway.
By default the IP address is set to: 192.168.0.1
After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:
You should see a box prompting you for your username and password.
Enter your username and password, and then click the Login button to log in to your Dlink DSL-504 v2 router.
Dlink Usernames and Passwords
If your username and password do not work then please visit our Default D-Link Router Passwords page.
If you still can't login to your router because you forgot your Dlink DSL-504 v2 router username and password, use our How to Reset a Router Password guide to set your Dlink DSL-504 v2 router back to its factory settings.
Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:
Click the Port Redirection link near the left of the page.
Click the Add button near the right of the page.
Here are the ports to forward for Xbox Live:
TCP Ports: 3074 UDP Ports: 3074
If you are looking for the ports for a different application you can find it by either:
Put a name for this forward in the Comment box so that you can remember why you set this forward up. The name does not matter so pick something that has meaning to you.
Enter the port to forward into both the Internet Port and the Local Port boxes.
Use the Protocol dropdown box to select the protocol type of the ports you are forwarding.
Enter the IP address that you want to forward these ports to into the Local Computer box. Note that if you are forwarding ports so you can run a program on a device other than your computer then you can enter your device's IP address into that box instead.
When you are finished, click the Ok button.
Click the Save Changes link near the left of the page.
When you're finished, click Save Configuration near the bottom of the screen to save your changes.
Now that you have forwarded ports on the Dlink DSL-504 v2 you should test to see if your ports are forwarded correctly.
To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.
We also have the Internets largest collection of Router Screenshots.