Network Utilities

Simple Linksys WRT110 Router Port Forwarding Instructions

This is the open port guide for the Linksys WRT110 v1.0.05. We also have the following related guides:

Pick the guide that most closely matches your router.

Linksys WRT110 v1.0.05 routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.

The basic process to open a port is:

  1. Setup a static IP address on either your computer or device that you want to forward a port to.
  2. Login to your Linksys WRT110 router.
  3. Navigate to the port forwarding section.
    • Click the Applications & Gaming link.
    • Click the Port Range Forwarding or the Single Port Forwarding button to forward ports.
  4. Create a port forward entry.

While these steps might seem difficult at first, we will walk you through each step for your Linksys WRT110 v1.0.05 router.



We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.

Get Started Now!

When you use Network Utilities you get your port forwarded right now!

Step 1

It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.

  • Recommended - Our free program will setup a static IP address for you.
  • Or follow our Static IP Address guides to setup a static IP address.

After setting up a static ip address on your devices you need to login to your router.

Step 2

Now we are going to login to your Linksys WRT110 v1.0.05 router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.

Open up your web browser and find the address bar. It should look something like this:


192.168.1.1

In the picture above the address bar has 192.168.1.1 in it. Just replace all of that with the IP address of your Linksys WRT110 v1.0.05 router. Your router's IP address can also be refered to as your computer's default gateway.

By default the IP address is set to: 192.168.1.1

After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:

Linksys WRT110v1.0.05

You should see a box prompting you for your username and password.

  • The Default Linksys WRT110 Router Username is: blank
  • The Default Linksys WRT110 Router Password is: admin

Enter your username and password, and then click the Login button to log in to your Linksys WRT110 v1.0.05 router.

Linksys Usernames and Passwords

If your username and password do not work then please visit our Default Linksys Router Passwords page.

If you still can't login to your router because you forgot your Linksys WRT110 v1.0.05 router username and password, use our How to Reset a Router Password guide to set your Linksys WRT110 v1.0.05 router back to its factory settings.

Step 3

Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:

Linksys WRT110v1.0.05

Click the Applications & Gaming link near the top of the page.

This router has two different sections that allow you to forward ports. One section allows you to forward a range of ports, and the other allows you to forward a single port. To forward a range of ports, click Port Range Forwarding. To forward a single port, click Single Port Forwarding.

Linksys WRT110v1.0.05

Step 4

Here are the ports to forward for Xbox Live:

TCP Ports:3074
UDP Ports:3074

If you are looking for the ports for a different application you can find it by either:

Forwarding a Port Range

Put a name for this forward in the Application Name box so that you can remember why you set this forward up. The name does not matter so pick something that has meaning to you.

If you are just forwarding a single port number then you can simply enter that same number into both the Start and the End boxes. If you are forwarding a range of ports, usually separated by a hyphen, then you need to enter the lowest number of that range into the Start box and then enter highest number into the End box.

In the Protocol box select the protocol that you want to forward these ports over.

You need to enter the IP address that you are forwarding ports to in the To IP Address box. It's possible for this to be either the IP address of your computer or any other IP address on your network that you want ports forwarded to.

Put a checkmark in the Enabled checkbox.

Linksys WRT110v1.0.05 port forward

Forwarding a Single Port

Put a name for this forward in the Application Name box so that you can remember why you set this forward up. The name does not matter so pick something that has meaning to you.

Enter the same port number to be forwarded into both the External Port and the Internal Port boxes.

Select the required protocol for these ports from the Protocol dropdown box.

Enter the IP address that you want to forward these ports to into the To IP Address box. Note that if you are forwarding ports so you can run a program on a device other than your computer then you can enter your device's IP address into that box instead.

Put a checkmark in the Enable checkbox.

When you're finished, click Save Settings near the bottom of the screen to save your changes.

Test if Your Ports are Open

Now that you have forwarded ports on the Linksys WRT110 v1.0.05 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Linksys WRT110 v1.0.05 Router Screenshots

We also have the Internets largest collection of Router Screenshots.