Netgear C3000-100NAS routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.
The basic process to open a port is:
- Setup a static IP address on either your computer or device that you want to forward a port to.
- Login to your Netgear C3000 N300 router.
- Navigate to the port forwarding section.
- Click the Advanced button.
- Click on Advanced Setup.
- Click on Port Forwarding / Port Triggering.
- Click the Add Custom Service button.
- Create a port forward entry.
While these steps might seem difficult at first, we will walk you through each step for your Netgear C3000-100NAS router.
It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.
- Recommended - Our free Static IP Setter will set up a static IP address for you.
- Another way to get a permanent IP address is to set up a DHCP reservation.
- Or, manually create a static ip address with our Static IP Guides.
This step is important because you want a permanent IP address in your device. If you do not set up a permanent IP address in your device, then when you device reboots it may get a new IP address.
Now we are going to login to your Netgear C3000-100NAS router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.
Open up your web browser and find the address bar. It should look something like this:
Above is an example of what a web browser address bar looks like. Find the address bar in your router and type in your router's IP address.
The default Netgear C3000 N300 IP Address is: 192.168.0.1
After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:
You should see a box prompting you for your username and password.
- The Default Netgear C3000 N300 Router Username is: admin
- The Default Netgear C3000 N300 Router Password is: password
Enter your username and password, and then click the Login button to log in to your Netgear C3000-100NAS router.
Netgear Usernames and Passwords
If your username and password do not work then please visit our Default Netgear Router Passwords page.
If you still can't login to your router because you forgot your Netgear C3000-100NAS router username and password, use our How to Reset a Router Password guide to set your Netgear C3000-100NAS router back to its factory settings.
Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:
Click the Advanced button near the top of the page.
The menu on the left should change. In this new menu, click Advanced Setup.
You should now see a new menu. In this new menu, click Port Forwarding / Port Triggering.
Click the Add Custom Service button near the center of the page.
Here are the ports to forward for Xbox Live:
- TCP Ports: 3074
- UDP Ports: 3074
If you are looking for the ports for a different application you can find it by either:
You need to name this entry in the Service Name box. The name does not make any difference in the forward; it's just there so that you can remember later why you setup this forward.
In the Service Type box select the protocol that you want to forward these ports over.
If you are only forwarding a single port number then enter that number into both the External Starting Port and the External Ending Port boxes. If you are forwarding a range of ports separated by a hyphen then enter the lowest number of that range into the External Starting Port box and the highest number of that range into the External Ending Port box.
Make sure that the Use the same port range for Internal port checkbox is checked.
You need to enter the IP address that you are forwarding ports to in the Internal IP Address box. It's possible for this to be either the IP address of your computer or any other IP address on your network that you want ports forwarded to.
When you are done click the Apply button.
Your ports should now be open. It is time to test them.
Test if Your Ports are Open
Now that you have forwarded ports on the Netgear C3000-100NAS you should test to see if your ports are forwarded correctly.
To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.
Netgear C3000-100NAS Router Screenshots
We also have the Internets largest collection of Router Screenshots.