Network Utilities

Fastest Netgear UTM5 Router Port Forwarding Instructions

Netgear UTM5 routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.

The basic process to open a port is:

  1. Setup a static IP address on either your computer or device that you want to forward a port to.
  2. Login to your Netgear UTM5 router.
  3. Navigate to the port forwarding section.
  4. Create a port forward entry.

While these steps might seem difficult at first, we will walk you through each step for your Netgear UTM5 router.



We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.

Get Started Now!

When you use Network Utilities you get your port forwarded right now!

Step 1

It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.

  • Recommended - Our free program will setup a static IP address for you.
  • Or follow our Static IP Address guides to setup a static IP address.

After setting up a static ip address on your devices you need to login to your router.

Step 2

Now we are going to login to your Netgear UTM5 router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.

Open up your web browser and find the address bar. It should look something like this:


192.168.0.1

In the picture above the address bar has 192.168.0.1 in it. Just replace all of that with the IP address of your Netgear UTM5 router. Your router's IP address can also be refered to as your computer's default gateway.

By default the IP address is set to: 192.168.0.1

After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:

Netgear UTM5

You should see a box prompting you for your username and password.

  • The Default Netgear UTM5 Router Username is: admin
  • The Default Netgear UTM5 Router Password is: password

Enter your username and password, and then click the Login button to log in to your Netgear UTM5 router.

Netgear Usernames and Passwords

If your username and password do not work then please visit our Default Netgear Router Passwords page.

If you still can't login to your router because you forgot your Netgear UTM5 router username and password, use our How to Reset a Router Password guide to set your Netgear UTM5 router back to its factory settings.

Step 3

Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:

Netgear UTM5

Step 4

Here are the ports to forward for Xbox Live:

TCP Ports:3074
UDP Ports:3074

If you are looking for the ports for a different application you can find it by either:

Click the Security link near the top of the page.

You will now see a new menu. In this new menu, click Services.

Netgear UTM5

Enter the name of the program into the Name box. It doesn't really matter what you put into this box, but something that will remind you why these ports are being forwarded is be a good idea.

From the Type box select the protocol for the ports that you want to forward.

If you are only forwarding a single port number then enter that number into both the Start Port and the Finish Port boxes. If you are forwarding a range of ports separated by a hyphen then enter the lowest number of that range into the Start Port box and the highest number of that range into the Finish Port box.

After you are done click the Add button.

Near the top of the page click the Firewall Rules link.

Netgear UTM5

Click the Outbound or Inbound Services Add button.

Netgear UTM5

Select the service you created from the Service dropdown box.

From the Action dropdown box select ALLOW always.

Enter the IP address that you are forwarding ports to in the Send to LAN Server box. This is either the IP address of a computer or the IP address of another device on your network.

Use the WAN Users dropdown box to select Any.

Use the Log dropdown box to pick Never.

When you are finished, click the Apply button.

Your ports should now be open. It is time to test them.

Test if Your Ports are Open

Now that you have forwarded ports on the Netgear UTM5 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Netgear UTM5 Router Screenshots

We also have the Internets largest collection of Router Screenshots.