Netopia 3547W routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.
The basic process to open a port is:
- Setup a static IP address on either your computer or device that you want to forward a port to.
- Login to your Netopia 3547W router.
- Navigate to the port forwarding section.
- Click the Expert Mode link.
- Click the Yes~~ button.
- Click on Configure.
- Click on NAT.
- Click the Define Custom Service button.
- Click the Port Forwarding: Range of Ports radio button.
- Click the Next button.
- Create a port forward entry.
While these steps might seem difficult at first, we will walk you through each step for your Netopia 3547W router.
We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.
When you use Network Utilities you get your port forwarded right now!
It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.
- Recommended - Our free Static IP Setter will set up a static IP address for you.
- Another way to get a permanent IP address is to set up a DHCP reservation.
- Or, manually create a static ip address with our Static IP Guides.
This step is important because you want a permanent IP address in your device. If you do not set up a permanent IP address in your device, then when you device reboots it may get a new IP address.
Now we are going to login to your Netopia 3547W router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.
Open up your web browser and find the address bar. It should look something like this:
Above is an example of what a web browser address bar looks like. Find the address bar in your router and type in your router's IP address.
The default Netopia 3547W IP Address is: 192.168.1.1
After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:
You should see a box prompting you for your username and password.
- The Default Netopia 3547W Router Username is: admin
- The Default Netopia 3547W Router Password is: 1234
Enter your username and password, and then click the Login button to log in to your Netopia 3547W router.
Netopia Usernames and Passwords
If your username and password do not work then please visit our Default Netopia Router Passwords page.
If you still can't login to your router because you forgot your Netopia 3547W router username and password, use our How to Reset a Router Password guide to set your Netopia 3547W router back to its factory settings.
Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:
Click the Expert Mode link near the left of the page.
Click the Yes, enter expert mode button near the center of the page.
The menu on the left should change. In this new menu, click Configure.
You should now see a new menu. In this new menu, click NAT.
Click the Define Custom Service button near the center of the page.
Put a dot into the Port Forwarding: Range of Ports radio button.
Click the Next button.
Here are the ports to forward for Xbox Live:
- TCP Ports: 3074
- UDP Ports: 3074
If you are looking for the ports for a different application you can find it by either:
- Browsing our List of Games
- Check out our our List of Games by Genre
- See our List of all Applications
Create a name for this forward and put it in the Service Name box. The name is only used as a reminder and has no effect on the port forward.
If you are forwarding a single port, enter that port number into the Base Host Port, Left Global Port Range and the Right Global Port Range boxes. If you are forwarding a range of ports, enter the lowest number of that range into the Base Host Port, Left Global Port Range box. Then enter the highest number of that range into the Right Global Port Range box.
Select the protocol type using the Protocol radio button. If you need both TCP and UDP then create a duplicate configuration.
The first configuration needs to have TCP selected while the second one has UDP selected.
When you are done click the Next button.
Select the service you created from the Service Name drop down box.
Click the Enable button.
Your ports should now be open. It is time to test them.
Test if Your Ports are Open
Now that you have forwarded ports on the Netopia 3547W you should test to see if your ports are forwarded correctly.
To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.
Netopia 3547W Router Screenshots
We also have the Internets largest collection of Router Screenshots.