Setting up a Static IP Address for Your Xbox Series X|S: A Comprehensive Guide

If you are having a difficult time joining chats or multiplayer matches on your Xbox Series X it may be due to your network having a Strict or Moderate NAT Type. To change your NAT Type from Strict or Moderate to Open you will need to assign a permanent IP address to your console and then forward some ports in your router. This guide should help you solve this common networking problem and get you back to enjoying your game.

Assigning a permanent IP address to your Xbox Series X ensures that your console always has the same internal IP address even after it is rebooted. Some routers allow you to manually assign an IP address, so you should check to see if that is an option in your router. If your router does not allow manual assignments, you can set up a static IP address in your Xbox Series X console.

Assign a Static IP Address to your Xbox Series X In Your Router

In your router, look for a way to manually assign an IP address. This process will differ depending on the specific router that you have. If you find this feature in your router, simply assign a permanent IP address to your Xbox Series X (in your router) and no changes are required in your Xbox Series X console. Your router will take care of always assigning your Xbox Series X the same internal IP address which will function the same as a static IP.

If you have a router that does not allow you to manually assign IP addresses, you will need to set up a static IP address within your Xbox Series X console. Follow these steps to assign an IP address in your router:

Assign Your Xbox a Permanent IP Address

You can try to permanently assign your Xbox Series X to the IP address that it is currently using. You can find the current IP address under advanced settings in the Xbox Series X Dashboard menu. To find the IP address, power up your Xbox Series X console and follow these steps:

Go to the home screen and push the menu button on the controller
Select Settings
Select Network
Select Advanced settings
In the IP settings section you should see the IP address listed. (See screenshot below.) Write down this number because you will need to enter it into your router later.
You should see Wired MAC address or Wireless MAC address listed under IP settings as well. The MAC address of your Xbox Series X console is a unique number and every console is assigned a different one from the factory. Write down the 12-digit address for the one that you are using (wired or wireless.)In your router, you will need to assign this MAC address to the IP address you have chosen (see step 2 for instructions.)

Login to your router (through your computer) and permanently assign your Xbox Series X to the IP address you found in step 1. For help logging in to your router visit our login guides.

Here is an example of a router that allows you to manually assign IP addresses.

Asus DHCP Server Enable Manual Assignment

In this Asus router, there is a box to type the IP address into and then a drop down menu for the MAC address. Use the numbers that you wrote down in step 1 of this guide. In this example, after typing in the addresses there is an "Add" button to click.

Some routers do not allow you to assign IP addresses within the DHCP range of the router (the range of addresses that your router automatically assigns to devices on your network.) If this is the case with your router, you will need to choose an IP address to assign that is outside the DHCP range of your router. See steps 2 through 4 of the following guide for help with choosing an IP address that is outside your router's DHCP range.

Test Your Xbox Network Connection

After you have assigned your Xbox Series X to a specific IP address, test the connection from your Xbox Series X Dashboard to make sure it is working. To test the connection:

From the Xbox Series X Dashboard, choose Settings
Select Network
Choose Test network connection
Wait while the test runs. It will check your connection to make sure your console is communicating with your network.
"It's all good" should be displayed after the test is finished.

Forward Ports in your Router for your Xbox

Forwarding ports, or opening ports, in your router points all traffic coming in on certain ports to a specific internal IP address. To get an Open NAT Type, you will want to forward the following ports to the IP address of your Xbox Series X:

TCP: 53, 80, 3074
UDP: 53, 88, 500, 3074, 3544, 4500

For help with port forwarding you can visit our router guides.

Test Your Xbox Network Connection Again

After you have assigned a permanent IP address to your Xbox Series X console and forwarded the correct ports in your router, you can test your network connection. To test the connection from the Xbox Series X Dashboard:

Select Settings
Select Network
Choose Test network connection
Wait while the test runs.
The results of the test should tell you if your NAT Type is Open, Moderate, or Strict.

Your network connection should now have an Open NAT Type. If your network status is set to NAT Type: Open, congratulations to you! This a common networking problem that can be quite difficult to solve. Good job making it through the guide and optimizing your network. Now you should be able to enter into more matches and chat with all of your gaming buddies. Now, go enjoy your game!

If you are not able to get an Open NAT Type, check to see that you have entered in the correct information. Double check the data that you entered for the IP address and MAC address.

If you are still having difficulty getting an Open NAT Type check to see that your network is set up properly. You may have more than one router on your network. To determine if there is more than one router on your network you can run our free Router Detector software. It is important to only have one router on your network otherwise it is difficult to configure your network without running into problems.

Set up a Static IP address in your Xbox Series X Console

If you have a router that does not allow you to manually assign internal IP addresses, follow these instructions to set up a static IP address in your Xbox Series X console:

Find Your Current Xbox IP Address

Find out what IP address, subnet mask, gateway, and DNS settings your Xbox Series X console is currently using. To find this info:

Go to the home screen and push the menu button on the controller
Select Settings
Select Network
Select Advanced settings
In the IP settings section, you should see the IP address, Subnet Mask, Gateway, Primary DNS, Secondary DNS, and MAC address listed. (See screenshot below.) Write all of these numbers down, you will need to enter them in later.

Next, login to your router (through your computer) and note the DHCP range your router uses. The DHCP range is the group of numbers that your router uses to assign internal IP addresses to devices on your network. For help logging in to your router visit our router guides and/or our guides on finding your router's IP address.

Here is a screenshot of a Linksys router. The DHCP range is circled in red.

Choose an IP Address for your Xbox

You will need to pick a number between 2 and 254 that is outside of your router's DHCP range to assign to your Xbox Series X.

In the example above, this Linksys router uses the range 100-149 to assign IP addresses to devices on the internal network. I chose to assign my Xbox to 201. The IP address that I am going to assign to my Xbox is 192.168.1.201. (Be sure to use the first three numbers that are in your router's IP address, also known as gateway.) Here are a few more examples for you:

If your router's DHCP range is 200-254 you could choose a number between 2 and 50 to try.
If your router uses 50-200, you could try a number between 2 and 49.

Use Ping to Find to Find an Available IP Address

To find out if this number is available ping the address using the Windows Command Prompt.

To open the Command Prompt:

Click on the Windows Start menu
Type cmd to search for the Command Prompt
Then click on cmd.exe (which should be listed over the dialog box). A black window with white text should open.

To check whether or not the IP address is available for you to assign:

Type ping
Hit the space bar
Then type in the IP address you want to check. Hit Enter.

If you ping an address and do not receive a reply, then the IP address is available for you to assign. (See example above.) If you do receive a reply then that IP address is in use and you will have to try a different one. Below is an example showing an address that is already in use.

Enter Static IP Address in Xbox

Next, go to your Xbox Series X console to set the internal IP address to the number you have chosen.

From the home menu, select Settings
Select Network
Select Advanced settings
select IP settings
Select Manual
Type in the IP address you have chosen and select Enter
Type in the subnet mask (usually 255.255.255.0). This should be one of the numbers that you wrote down at the beginning of this guide. Select Enter
Type in your gateway which is your router's internal IP address and select Enter
Go back to the advanced settings screen
Choose DNS settings
Type in the Primary DNS address (from the list that you made in step 1) then select Enter
Type in the Secondary DNS address and select Enter
On the Advanced settings screen choose Save

Test Xbox Network Connection

Test your network connection. In the Xbox Series X Dashboard:

Go back to the Network settings screen, choose Test network connection
The test will run and check your network connection status. Wait while the test runs.
When the test is finished you should see the "It's all good" message.

Forward Ports in Your Router for Your Xbox

TCP: 53, 80, 3074
UDP: 53, 88, 500, 3074, 3544, 4500

For help with port forwarding you can visit our port forwarding guides.

Test Xbox Network Settings

Select Settings
Select Network
Choose Test network connection
Wait while the test runs.
The results of the test should tell you if your NAT Type is Open, Moderate, or Strict.

Your network status should now be set to NAT Type: Open. If you have an Open NAT Type, congratulations to you! This a common networking problem that can be quite difficult to solve. Good job making it through the guide and optimizing your network. Now you should be able to enter into more matches and chat with all of your gaming buddies. Now, go enjoy your game!

If you are not able to get an Open NAT Type, check to see that you have entered in the correct information. Double check the data that you entered for the IP address, subnet mask, gateway, and DNS addresses.