Network Utilities

Simple Uniden WNR2004 Router Open Port Instructions

Uniden WNR2004 routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.

The basic process to open a port is:

  1. Setup a static IP address on either your computer or device that you want to forward a port to.
  2. Login to your Uniden WNR2004 router.
  3. Navigate to the port forwarding section.
    • Click the Firewall/Security link.
    • Click on Port Mapping.
    • Click the Add button.
  4. Create a port forward entry.

While these steps might seem difficult at first, we will walk you through each step for your Uniden WNR2004 router.



We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.

Get Started Now!

When you use Network Utilities you get your port forwarded right now!

Step 1

It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.

  • Recommended - Our free program will setup a static IP address for you.
  • Or follow our Static IP Address guides to setup a static IP address.

After setting up a static ip address on your devices you need to login to your router.

Step 2

Now we are going to login to your Uniden WNR2004 router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.

Open up your web browser and find the address bar. It should look something like this:


192.168.1.1

In the picture above the address bar has 192.168.1.1 in it. Just replace all of that with the IP address of your Uniden WNR2004 router. Your router's IP address can also be refered to as your computer's default gateway.

By default the IP address is set to: 192.168.1.1

After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:

Uniden WNR2004

You should see a box prompting you for your username and password.

  • The Default Uniden WNR2004 Router Username is: UNIDEN
  • The Default Uniden WNR2004 Router Password is: blank

Enter your username and password, and then click the Login button to log in to your Uniden WNR2004 router.

Uniden Usernames and Passwords

If your username and password do not work then please visit our Default Uniden Router Passwords page.

If you still can't login to your router because you forgot your Uniden WNR2004 router username and password, use our How to Reset a Router Password guide to set your Uniden WNR2004 router back to its factory settings.

Step 3

Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:

Uniden WNR2004

Click the Firewall/Security link near the left of the page.

You should now see a new menu. In this new menu, click Port Mapping.

Uniden WNR2004

Click the Add button near the bottom of the page.

Uniden WNR2004 port forward

Step 4

Here are the ports to forward for Xbox Live:

TCP Ports:3074
UDP Ports:3074

If you are looking for the ports for a different application you can find it by either:

Use the Port Mapping dropdown box to pick Enable.

Enter the IP address to forward these ports to into the Local IP box. If you are forwarding ports so you can run a program on a device other than your computer then you can enter your device's IP address into that box.

If you are forwarding a range of ports separated by a hyphen then enter the lowest number of that range into the Start Port box and the highest number of that range into the End Port box. If you are only forwarding a single port number then enter that number into both the Start Port and the End Port boxes.

Select the protocol type of the ports you are forwarding from the Protocol box.

Enter the name of the program into the Remark box. It doesn't really matter what you put into this box, but something that will remind you why these ports are being forwarded is be a good idea.

Click the Apply button when you are all done.

Your ports should now be open. It is time to test them.

Test if Your Ports are Open

Now that you have forwarded ports on the Uniden WNR2004 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Uniden WNR2004 Router Screenshots

We also have the Internets largest collection of Router Screenshots.