Port Forwarding the 2wire 1070-B Router for D-Link DCS-920

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View 2wire Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > 2wire > 1070-B > D-Link DCS-920

Login to the 2wire 1070-B Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your 2wire 1070-B Router IP Address

It's ok if you don't know your 2wire 1070-B router's internal IP address. You can find it by doing one of the following:

Login To The 2wire 1070-B Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

2wire 1070-B Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your 2wire 1070-B router. By default the IP address should be set to

How to Port Forward D-Link DCS-920 on the 2wire 1070-B

Having trouble forwarding ports on the 2wire 1070-B?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

2wire 1070-B Router Port Forwarding Screenshots

Now that you are logged in to your 2wire 1070-B router you should see the following:

Look for your password on the bottom of your router or in the paperwork that came with your router.

2wire 1070-B Screenshot 1

Click the Firewall button.

2wire 1070-B Screenshot 2

Click the Firewall Settings button.

2wire 1070-B Screenshot 3

Use the Select a computer box to choose a device to forward ports to. This box contains a list of device names that are visible on your network.

Click the Add a new user-defined application link.

2wire 1070-B Screenshot 4

Forward Ports 80 on the 2wire 1070-B

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. D-Link DCS-920 requires you to forward the 80 ports. Go ahead and enter the settings shown above into the Edit Application menu and then click Add Definition.

  Application Name:  
  Protocol: TCP UDP   
  Port (or Range): From: To:   
  Protocol Timeout (seconds): TCP default=86400
UDP default=600
  Map to Host Port: Default= the same port as
defined above

Click the Back button.

2wire 1070-B Screenshot 3

Select the applications you just created in the Applications list, then click the Add button to move them to the Hosted Applications box.

When you are finished, click the Done button at the bottom of your screen.

And that is it! You are done!

Test if Your Ports are Open

Now that you have forwarded ports for D-Link DCS-920 on the 2wire 1070-B you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

2wire 1070-B Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our 2wire Router Screenshots. We have the Internets largest collection of Router Screenshots.