To setup port forwarding on the neufbox NB4-SER-r0 router your computer needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your neufbox NB4-SER-r0 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your neufbox NB4-SER-r0 router. By default the IP address should be set to 192.168.1.1.
We do not currently know the default username and password for your router. If you know them, please use our Comments page to let us know what they are. Thanks!Please visit our Default Router Passwords page if the username and password shown above do not work for you.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your neufbox NB4-SER-r0 router to save you time and hassle.
Now that you are logged in to your neufbox NB4-SER-r0 router you should see the following:
Click the Reseau button near the top of the page.
Click the NAT button near the top of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. XBOX360 Quake 4 requires you to forward the 3074 ports. Go ahead and enter the settings shown above into the Translation de ports menu and then click Add.
|Addresse IP de destination||Ports de |
And that is it! You are done!
Now that you have forwarded ports for XBOX360 Quake 4 on the neufbox NB4-SER-r0 you should test to see if your ports are forwarded correctly.