Network Utilities

How to Open Ports in a Netopia 3347-02 Router

This is the open port guide for the Netopia 3347-02 Qwest. We also have the following related guides:

Pick the guide that most closely matches your router.

Netopia 3347-02-Qwest routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.

The basic process to open a port is:

  1. Setup a static IP address on either your computer or device that you want to forward a port to.
  2. Login to your Netopia 3347-02 router.
  3. Navigate to the port forwarding section.
    • Click the Gaming link.
    • Click the Define Custom Service button.
    • Click the Port Forwarding: Range of Ports radio button.
    • Click the Next button.
  4. Create a port forward entry.

While these steps might seem difficult at first, we will walk you through each step for your Netopia 3347-02-Qwest router.

We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.

Get Started Now!

When you use Network Utilities you get your port forwarded right now!

Step 1

It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.

  • Recommended - Our free program will setup a static IP address for you.
  • Or follow our Static IP Address guides to setup a static IP address.

After setting up a static ip address on your devices you need to login to your router.

Step 2

Now we are going to login to your Netopia 3347-02-Qwest router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.

Open up your web browser and find the address bar. It should look something like this:

In the picture above the address bar has in it. Just replace all of that with the IP address of your Netopia 3347-02-Qwest router. Your router's IP address can also be refered to as your computer's default gateway.

By default the IP address is set to:

After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:

Netopia 3347-02-Qwest

You should see a box prompting you for your username and password.

  • The Default Netopia 3347-02 Router Username is: admin
  • The Default Netopia 3347-02 Router Password is: admin

Enter your username and password, and then click the Login button to log in to your Netopia 3347-02-Qwest router.

Netopia Usernames and Passwords

If your username and password do not work then please visit our Default Netopia Router Passwords page.

If you still can't login to your router because you forgot your Netopia 3347-02-Qwest router username and password, use our How to Reset a Router Password guide to set your Netopia 3347-02-Qwest router back to its factory settings.

Step 3

Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:

Netopia 3347-02-Qwest

Click the Gaming link near the left of the page.

Netopia 3347-02-Qwest

Click the Define Custom Service button near the center of the page.

Netopia 3347-02-Qwest

Put a dot into the Port Forwarding: Range of Ports radio button.

Click the Next button near the center of the page.

Netopia 3347-02-Qwest

Step 4

Here are the ports to forward for Xbox Live:

TCP Ports:3074
UDP Ports:3074

If you are looking for the ports for a different application you can find it by either:

You need to name this entry in the Service Name box. The name does not make any difference in the forward; it's just there so that you can remember later why you setup this forward.

If you are only forwarding a single port then you can enter that same port number into both the left Global Port Range and the right Global Port Range boxes. If you are forwarding a range of ports then you need to enter the lowest number into the left Global Port Range box and the highest number into the right Global Port Range box.

Enter the port to forward into the Base Host Port box.

Select the protocol that you are forwarding in the Protocol radio button.

If you need both TCP and UDP forwarded then you need to create a duplicate configuration. One configuration has TCP selected and the other one has have UDP selected.

When you are all done click the Next button.

Netopia 3347-02-Qwest

Select the service you created from the Service Name drop down box.

Click the Enable button near the center of the page.

Netopia 3347-02-Qwest port forward

Use the Select Host Device box to choose a device to forward ports to. This box contains a list of device names that are visible on your network.

When you're finished, click Enable near the bottom of the screen to save your changes.

Test if Your Ports are Open

Now that you have forwarded ports on the Netopia 3347-02-Qwest you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Netopia 3347-02-Qwest Router Screenshots

We also have the Internets largest collection of Router Screenshots.