Free Port Forwarding Guides & PFConfig: Forward Your Ports Automatically
Port Forwarding BitTorrent on the 2wire 1000sw
Before we can forward ports for BitTorrent, we should set the ports that BitTorrent uses. Here is a brief walkthrough on how to do that. Go ahead and open up BitTorrent.
In the menu at the top of your screen, click the View link. Then in the list of options that drops down click the Settings option.
A new window should have poped up that looks like the picture above. There are a few tabs at the top of this window, click the Network tab.
The number in the starting at port box tells BitTorrent where you start looking for open ports. BitTorrent works it's way up from that port number until it finds a port that is open. Every port that BitTorrent has to check takes time. So it would be a good idea to forward the port that you enter into the Starting at Port box. Many ISPs block ports in the 6000 range. Please choose a port between 10000 and 60000 then enter it into the Starting at Port box. Then enter that port into the box below.
BitTorrent's Port for incoming connections
If you plan on downloading multiple files at the same time via BitTorrent, you need to open up one port for each file. This guide will show you how to open up one port for each file. If you chose to put port 12540 into the Starting at Port box and wanted to have five files going at the same time, you should forward ports 12540 to 12544.
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
If you do not know your routers internal IP address please read our How To Find Your Routers IP Address guide.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your router.
By default the IP address should be set to 172.16.0.1.
Click the Firewall button.
Click the Firewall Settings button.
Use the Select a computer box to choose a computer to forward ports to. This box contains a list of computer names that are visible on your network.
Click the Add a new user-defined application link.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. BitTorrent requires you to forward the ports you entered above. Go ahead and enter the settings shown above into the Edit Application menu and then click Add Definition.
 | |||||
| Application Name: | |||||
 | |||||
| Protocol: | TCP | UDP | |||
| Port (or Range): | From: | To: | |||
| Protocol Timeout (seconds): | TCP default=86400 UDP default=600 | ||||
| Map to Host Port: | Default= the same port as defined above | ||||
 | |||||
Click the Back button.
Select the applications you just created in the Applications list, then click the Add button to move them to the Hosted Applications box.
When you are finished, click the Done button at the bottom of your screen.
And that is it! You are done!
To test if your port has been properly forwarded, you can use our Port Checker tool.
Didn't find the screenshot you were looking for? Check our our giant collection of router screenshots.