Sitecom WL-127 Router Port Forwarding Guide
This is the open port guide for the Sitecom WL-127. We also have the following related guides:
Pick the guide that most closely matches your router.
Sitecom WL-127 routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.
The basic process to open a port is:
- Setup a static IP address on either your computer or device that you want to forward a port to.
- Login to your Sitecom WL-127 router.
- Navigate to the port forwarding section.
- Click the Firewall link.
- Click on Port.
- Create a port forward entry.
While these steps might seem difficult at first, we will walk you through each step for your Sitecom WL-127 router.
We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.
When you use Network Utilities you get your port forwarded right now!
It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.
- Recommended - Our free program will setup a static IP address for you.
- → Download Network Utilities today!
- Or follow our Static IP Address guides to setup a static IP address.
After setting up a static ip address on your devices you need to login to your router.
Now we are going to login to your Sitecom WL-127 router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.
Open up your web browser and find the address bar. It should look something like this:
In the picture above the address bar has 192.168.0.1 in it. Just replace all of that with the IP address of your Sitecom WL-127 router. Your router's IP address can also be refered to as your computer's default gateway.
By default the IP address is set to: 192.168.0.1
After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:
You should see a box prompting you for your username and password.
- The Default Sitecom WL-127 Router Username is: admin
- The Default Sitecom WL-127 Router Password is: admin
Enter your username and password, and then click the Login button to log in to your Sitecom WL-127 router.
Sitecom Usernames and Passwords
If your username and password do not work then please visit our Default Sitecom Router Passwords page.
If you still can't login to your router because you forgot your Sitecom WL-127 router username and password, use our How to Reset a Router Password guide to set your Sitecom WL-127 router back to its factory settings.
Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:
Click the Firewall link near the top of the page.
You should now see a new menu. In this new menu, click Port.
Here are the ports to forward for Xbox Live:
TCP Ports: 3074 UDP Ports: 3074
If you are looking for the ports for a different application you can find it by either:
Verify that you have the Port Forwarding Enable checkbox checked.
Enable the This Rule Enable checkbox by putting a check in it.
Select the required protocol for these ports from the Protocol dropdown box.
You need to name this entry in the Comment box. The name does not make any difference in the forward; it's just there so that you can remember later why you setup this forward.
Enter the IP address that you want to forward these ports to into the Local IP Address box. Note that if you are forwarding ports so you can run a program on a device other than your computer then you can enter your device's IP address into that box instead.
Put the same port number into both the Local Port and the Remote Port boxes.
In the Remote IP Address box put 192.168.0.1.
Click the Apply button when you are done.
Your ports should now be open. It is time to test them.
Test if Your Ports are Open
Now that you have forwarded ports on the Sitecom WL-127 you should test to see if your ports are forwarded correctly.
To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.
Sitecom WL-127 Router Screenshots
We also have the Internets largest collection of Router Screenshots.