Network Utilities

Sitecom WL-342 Router Port Forwarding Instructions

This is the open port guide for the Sitecom WL-342 v2. We also have the following related guides:

Pick the guide that most closely matches your router.

Sitecom WL-342 v2 routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.

The basic process to open a port is:

  1. Setup a static IP address on either your computer or device that you want to forward a port to.
  2. Login to your Sitecom WL-342 router.
  3. Navigate to the port forwarding section.
    • Click the Advanced Settings button.
    • Click the Port Forwarding or the Virtual Server button to forward ports.
  4. Create a port forward entry.

While these steps might seem difficult at first, we will walk you through each step for your Sitecom WL-342 v2 router.



We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.

Get Started Now!

When you use Network Utilities you get your port forwarded right now!

Step 1

It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.

  • Recommended - Our free program will setup a static IP address for you.
  • Or follow our Static IP Address guides to setup a static IP address.

After setting up a static ip address on your devices you need to login to your router.

Step 2

Now we are going to login to your Sitecom WL-342 v2 router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.

Open up your web browser and find the address bar. It should look something like this:


192.168.0.1

In the picture above the address bar has 192.168.0.1 in it. Just replace all of that with the IP address of your Sitecom WL-342 v2 router. Your router's IP address can also be refered to as your computer's default gateway.

By default the IP address is set to: 192.168.0.1

After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:

Sitecom WL-342v2

You should see a box prompting you for your username and password.

  • The Default Sitecom WL-342 Router Username is: admin
  • The Default Sitecom WL-342 Router Password is: admin

Enter your username and password, and then click the Login button to log in to your Sitecom WL-342 v2 router.

Sitecom Usernames and Passwords

If your username and password do not work then please visit our Default Sitecom Router Passwords page.

If you still can't login to your router because you forgot your Sitecom WL-342 v2 router username and password, use our How to Reset a Router Password guide to set your Sitecom WL-342 v2 router back to its factory settings.

Step 3

Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:

Sitecom WL-342v2

Click the Advanced Settings button near the top of the page.

This router has two different sections that allow you to forward ports. One section allows you to forward a range of ports, and the other allows you to forward a single port. To forward a range of ports, click Port Forwarding. To forward a single port, click Virtual Server.

Sitecom WL-342v2

Step 4

Here are the ports to forward for Xbox Live:

TCP Ports:3074
UDP Ports:3074

If you are looking for the ports for a different application you can find it by either:

Forwarding a Port Range

Verify that you have the Enable Port Forwarding checkbox checked.

Enter the IP address that you are forwarding ports to in the Local IP box. This is either the IP address of a computer or the IP address of another device on your network.

In the Type box select the protocol that you want to forward these ports over.

If you are forwarding a single port then you can enter that port number into the left Port Range and the right Port Range boxes. If you are forwarding a range of ports, enter the lowest number of that range into the left Port Range box. Then enter the highest number of that range into the right Port Range box.

You need to name this entry in the Comment box. The name does not make any difference in the forward; it's just there so that you can remember later why you setup this forward.

When you are finished, click the Add button.

Sitecom WL-342v2 port forward

Forwarding a Single Port

Enable the Enable Virtual Server checkbox by putting a check in it.

Enter the IP address that you want to forward these ports to in the Local IP box. You can enter either the IP address of your computer or the IP address of another computer or device on your network.

Enter the same port number to be forwarded into both the Local Port and the Public Port boxes.

Select the required protocol for these ports from the Type dropdown box.

Put a name for this forward in the Comment box so that you can remember why you set this forward up. The name does not matter so pick something that has meaning to you.

When you are all done click the Add button.

Your ports should now be open. It is time to test them.

Test if Your Ports are Open

Now that you have forwarded ports on the Sitecom WL-342 v2 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Sitecom WL-342 v2 Router Screenshots

We also have the Internets largest collection of Router Screenshots.