Fastest Way to Forward Ports on the Netgear WNR2000 Router

This is the port forwarding guide for the Netgear WNR2000 v3.We also have port forwarding guides for the following related routers:

Pick the guide that most closely matches your router.

Thumbnail image of Port Forward Staff
Port Forward Staff
November 01, 2016 (Last Updated: ) | Reading Time: 3 minutes

In this guide I will be showing you how to properly port forward the Netgear WNR2000 router. The Netgear WNR2000 router has a basic firewall that blocks incoming connections to your home network. This is to protect your home network. Sometimes you need to open these connections. This is called creating an open port or port forward.

To port forward the Netgear WNR2000 router you:

  1. Setup a static IP address on the device you want these ports to be forwarded to.
  2. Login to your Netgear WNR2000 router.
  3. Find the port forwarding section.
    • Click the Advanced button.
    • Click on Advanced Setup.
    • Click on Port Forwarding / Port Triggering.
    • Click the Add Custom Service button.
  4. Create a port forward.

This might seem difficult, but don't worry, we will walk you through each step in the process.

We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.

Get Started Now!

When you use Network Utilities you get your port forwarded right now!

Step 1

It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.

This step is important because you want a permanent IP address in your device. If you do not set up a permanent IP address in your device, then when you device reboots it may get a new IP address.

Step 2

It is time to login to the Netgear WNR2000 router. This router has a web interface, meaning you need to login to it using a web browser. It doesn't matter what web browser you use simply pick your favorite. Some common ones are Chrome, Firefox, or Internet Explorer.

Open up your web browser and find the address bar. It should look something like this:

Image of a browser address bar
Browser address bar

Above is an example of what a web browser address bar looks like. Find the address bar in your router and type in your router's IP address.

The default Netgear WNR2000 IP Address is:

Once you have entered in the correct IP Address of your router simply press the Enter button on the keyboard.

Netgear WNR2000v4
Screenshot of Netgear WNR2000v4.

You should now see a box prompting you for the username and password.

After you have entered the username and password click the OK button to login to the Netgear WNR2000 router.

Netgear Usernames and Passwords

If the username and password did not work then we recommend trying other Netgear usernames and passwords. Check out our Default Netgear Router Passwords page.

If you still are unable to login to the Netgear WNR2000 you probably have changed it in the past and forgotten it. It may be time to consider a factory reset. This reset reverts all settings back to how they were from the factory. To learn more read our How to Reset a Router Password guide.

Step 3

This step is to find the port forwarding section of the Netgear WNR2000 router. Let's start on the Home page of the Netgear WNR2000 router.

Netgear WNR2000v4
Screenshot of Netgear WNR2000v4.

First, click the Advanced tab at the top of the page.

Now, look to the left sidebar. Choose the option of Advanced Setup.

Under that choose the new option of Port Forwarding/Port Triggering.

Netgear WNR2000v4
Screenshot of Netgear WNR2000v4.

Next, look in the center section of the screen. Click the purple/blue button labeled Add Custom Service.

Netgear WNR2000v4 port forward
Screenshot of Netgear WNR2000v4 port forward.

Step 4

Here are the ports to forward for Xbox Live:

  • TCP Ports: 3074
  • UDP Ports: 3074

If you are looking for the ports for a different application you can find it by either:

You need to name this entry in the Service Name box. The name does not make any difference in the forward; it's just there so that you can remember later why you setup this forward.

Select the protocol type of the ports you are forwarding from the Service Type box.

If you are forwarding a single port, enter that port number into the Starting Port and the Ending Port boxes. If you are forwarding a range of ports, enter the lowest number of that range into the Starting Port box. Then enter the highest number of that range into the Ending Port box.

Enter the IP address of the device that you want to forward ports to into the Server IP Address box. This can be either the IP address of your computer or the IP address of another device on your network.

When you are finished, click the Apply button.

Don't forget to click the green Apply button at the top of the page after each entry.

Test if Your Ports are Open

Once you have finished forwarding the ports on the Netgear WNR2000 router you need to see if the ports have been forwarded correctly.

To do this you need to we recommend using our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Checker is the only port checking tool online that has Guaranteed Results.

Other Guides You May Like

More From Portforward