How to Port Forward a Technicolor TC7210.dNZ Router
Did you know this Technicolor TC7210.dNZ router has a basic firewall to help protect your home network from unwanted access from the Internet. This process of blocking ports is what a firewall does. When you need one or more of these ports unblocked it is called a port forward.
In this guide we will be walking you through each step in the process of getting your ports forwarded for the Technicolor TC7210.dNZ router:
We will walk you through how to:
- Setup a static IP address on the device or game console you want these ports forwarded to.
- Login to your Technicolor TC7210.dNZ router.
- Find the port forwarding section.
- Click the Advanced link.
- Click on Forwarding.
- Click the Create IPv4 button.
- Create a port forward.
We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.
When you use Network Utilities you get your port forwarded right now!
It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.
- Recommended - Our free program will setup a static IP address for you.
- → Download Network Utilities today!
- Or follow our Static IP Address guides to setup a static IP address.
After setting up a static ip address on your devices you need to login to your router.
Now we are going to login to your Technicolor TC7210.dNZ router. This router has a web interface, so you need to login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Safari. It usually does not matter which browser you decide to use.
Open up your web browser and find the address bar. It should look something like this:
In the picture above the address bar has been circled for you. Simply replace what is in this bar with the Technicolor TC7210.dNZ router's IP address (also called the Default Gateway).
If you have changed the router's IP address in the past and don't remember what you changed it to then you need to find out what you changed it to. Follow our How To Find Your Router's IP Address guide to do that.
By default the IP address of the Technicolor TC7210.dNZ router is: 192.168.0.1
At this point you should see the authentication box like this:
This box is asking for a password and username. Go ahead and enter the login values of your Technicolor TC7210.dNZ router.
- The Default Technicolor TC7210.dNZ Router Username is: blank
- The Default Technicolor TC7210.dNZ Router Password is: admin
Enter your username and password, and then click the OK button to login to your Technicolor TC7210.dNZ router.
This is an extremely common place to get stuck. If you find yourself here, there are several things you can do:
- First, we recommend trying other default Technicolor usernames and passwords. Sometimes if you have a slightly different firmware version you may have a different username and password. Try these Default Technicolor Router Passwords.
- If that does not work, it is probably because you changed the username and password in the past and have forgotten what you changed it to. If this is the case, use our Find Password App to help you figure out what you changed it to. This app automates the process of trying thousands of different combinations for you. Learn more about this on our Router Password Cracker page.
- Finally if nothing else works, it might be time to consider a reset. A reset erases every thing you have ever changed on the device including the username and password for your router. We strongly recommend trying other troubleshooting methods first. Learn more on our How to Reset a Router page.
This step involves finding the port forwarding section of your router. To do that let's start on the Status page of the device:
First, you are going to click the Advanced link at the top of the page.
Now, click the option in the left sidebar labeled Forwarding.
You should now see a page like the one above. Select the link in the center section of the page labeled Create IPv4.
Here are the ports to forward for Xbox Live:
TCP Ports: 3074 UDP Ports: 3074
If you are looking for the ports for a different application you can find it by either:
Enter the IP address that you want to forward these ports to into the Local IP Address box. Note that if you are forwarding ports so you can run a program on a device other than your computer then you can enter your device's IP address into that box instead.
If you are forwarding a range of ports then you need to enter the lowest number of the range into the Local Start Port and External Start Port boxes and the highest number of the range into the Local End Port and External End Port boxes. If you are only forwarding a single port then you can enter that same port number into the Local Start Port, Local End Port, External Start Port and External End Port boxes.
Select the required protocol for these ports from the Protocol dropdown box.
Create a name for this forward and put it in the Description box. The name is only used as a reminder and has no effect on the port forward.
Use the Enabled dropdown box to pick On.
When you are done click the Apply button.
Make sure to click the Apply button after each entry.
That's it, you are finished.
Testing if Your Ports are Open
After a port forward you need to test them to be sure they forwarded successfully. In order to do this we recommend using our Open Port Checker found in our Network Utilities free trial. Our port checker uses a local application to listen for the server trying to connect. This way we can confirm whether your port is forwarded or not.
If you have additional questions we recommend taking a look in our forum. The question you have may of already been answered. We also have a knowledgeable staff ready to answer any questions you may have.